正在瀏覽:
1 名遊客
Copy/Monitor of Lighting Fixtures, Plumbing Fixtures |
||
---|---|---|
註冊日期:
2006/9/27 3:39 帖子:
239
|
Copy/Monitor of Lighting Fixtures, Plumbing Fixtures.... 如何 監視/複製 建築版本已經配置好的照明、衛浴...等設備? This is the first in a series of videos we will be posting to briefly demonstrate the key new functioanlities in Revit MEP 2011. You can now Copy/Monitor lighting fixtures, plumbing fixtures, and air terminals from linked models allowing you to connect to architecturally placed components. Copy/Monitor of Mechanical Equipment is also allowed, allowing you to circuit Mechanical Equipment when using separate Electrical and Mechanical models. 如果您使用了REVIT MEP 2011,您可以通過複製/監視功能,將REVIT Architecture 所配置的燈具、設備、出風口..等元件轉為REVIT MEP內使用的機械設備,讓您在MEP中可以進行個別的電路設計 When you Copy/Monitor these components, when necessary, the components will be converted to face hosted. For example, if an architect placed Ceiling Hosted lighting fixtures, when copied, they will become face hosted. You can then modify the copies to add connectors, or modify the connector settings. 當您複製/監視這些元件時,部分元件可能會轉為依面配置,例如:原本在建築版本配置了依天花板建立的燈具,在REVIT MEP中完成複製後,該燈具會被轉換為依面配置,之後您就可以對該燈具進行電路連接設計 Click here for a brief overview in a Quick Time video. 點上方連結,您可以檢視相關影片 資料來源 http://inside-the-system.typepad.com/ ... es-plumbing-fixtures.html
2011/3/1 18:10
|
|
工具箱 |